BFC(BFE)8125 LED EXPLOSION-PROTECTED (EMERGENCY) FLOODLIGHT
APPLICATIONS
Suitable for illumination of hazardous locationsin various industries.
TECHNICAL DATA
Body material：Aluminum alloy with epoxy powder coating
Diffuser：Tempered glass
Rated voltage：AC110V-240V 50Hz/60 Hz
Wattage：70W 100W 150W
Luminous efficiency：140 lm / W
Emergency working power：6W
Emergency voltage：3.7V
Battery capacity：2 Ah
Emergency duration：>120 minutes
Battery charging time：<24 h
Degree of protection：IP66
Cable entry：G3/4
Corrosion-proof class：WF2
FEATURES
1、Optimum design of electrical system ensures 85% electrical efficiency and 0.98 power factor.
2、3rd generation LED light source
3、Vacuum coating reflector, 99.99% reflectivity
4、Driver isolated from the lamp in a separate compartment, thus resulting in a longer service life, as the heat form the lamp is not direct.
5、Painted U.S. marine grade aluminum alloy housing, corrosion resistance
DIMENSION DRAWINGS
Make sure pedal is firm: Hold firm pressure on pedal for several minutes, it should remain in position without sinking. If pedal sinks toward floor, check system for fluid leaks. DO NOT drive vehicle if pedal does not stay firm or can be pushed to the floor with normal pressure.
At very low speed (2-5 mph) apply brakes hard several times while turning steering from full left to full right, repeat several times. Remove the wheels and check that components are not touching, rubbing, or leaking.
Carefully examine all brake components, brake lines, and fittings for leaks and interference.
Make sure there is no interference with wheels or suspension components.
Drive vehicle at low speed (15-20 mph) making moderate and hard stops. Brakes should feel normal and positive. Again check for leaks and interference.
Always test vehicle in a safe place where there is no danger to (or from) other people or vehicles.
Always wear seat belts and make use of all safety equipment.
